ECOO-G thermal DOP plate (developed on press ), could be applied onto the press machine directly without processing/developer after imaging, chemistry free, environment-friendly, as same as Sonora XP.
Brief introduction
ECOO-G is well sold in Europe, USA, and Canada. It is like Kodak Sonora and Agfa Azura. It meets the trend of being environment-friendly and has a bright future. This plate can be applied on a printing machine directly without processing and developing. So it saves cost of labor, water treatment, and developer tank. Hope you like it.
Technical data
| Model | ECOO-G |
| Plate Type | thermal-negative type |
| Application | High grade commercial, newspaper and package printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Maximum short grain width | Maximum width 1280 mm |
| Spectrum sensitivity | 800-850 nm |
| Photosensitive wave length | 830 nm |
| Platesetter | Various dominant thermal platesetters in the market |
| Coating color | Light Grey |
| Low-energy imaging | 130-150 mj/ m² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99% @200 LPI AM or 20μm FM or mixture |
| The paper number of start-up | <20 sheets (fountain solution conductivity: 2000-3000μS, PH at lower range between 4-5) |
| Safety light | Ambient light(<800 LUX) up to 4 hours |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions Actual run length depends on printing conditions |
| Shelf life | 12 months with original sealed packaged |
| Transportation | Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity |
| Storage | Recommended condition: 18℃-24℃, 40%-50% RH. |
Features and application
Features
High-quality aluminum substrate and unique-grain processing technology. The substrate grain is uniform fine, which ensures the exact dot reproduction and excellent printing adaptability of the printing plate.
The professional formula design with infrared laser sensitive phase- change layer ensures that the plate can be put on press directly after exposure.
High sensitivity , wide tolerance, screen dots with margin sharpness
Excellent printability, fast-inking balance, suitable for high-grade commercial and packaging printing.
Compatible with various dominant thermal platesetters in the market, suitable for manual and automatic loading system.
Bright room operation in which people can operate safely under fluorescent lamp.
Stable quality.
A variety of the plates provided with thickness from 0.15mm to 0.40mm.
Application
Suitable for sheet-fed offset press or high speed rotary offset press.
Run length: 100000 impressions
Suitable for different types of traditional inks and fountain solutions, including alcohol's substitutes as fountain solutions.
Unsuitable to improve run length by baking plates.
Image contrast before and after
Plater structure
Product Tags:
|
|
Chemistry Free Processless Negative Thermal DOP Plate 0.15mm 0.30mm Thickness Images
|
